Name: ICEC27-ICMC 2018
Start: 2018-09-03T09:00:00+01:00
End: 2018-09-06T23:00:00+01:00
Location: University of Oxford Examination Schools

ICEC27-ICMC 2018

from Monday, September 3, 2018 (9:00 AM) to Thursday, September 6, 2018 (11:00 PM)

Monday, September 3, 2018

9:00 AM Arrival and Registration
Arrival and Registration
9:00 AM - 10:00 AM

10:00 AM Cryostat Design,Holger Neumann, Room 9
Cryostat Design,Holger Neumann, Room 9
10:00 AM - 11:00 AM

11:00 AM Multi-Layer Insulation Design and Manufacture, Bryan Shaughnessy
Multi-Layer Insulation Design and Manufacture, Bryan Shaughnessy
11:00 AM - 12:00 PM

12:00 PM Lunch
Lunch
12:00 PM - 1:00 PM

1:00 PM Superconducting Materials, Jorge Pelegrin Mosquera
Superconducting Materials, Jorge Pelegrin Mosquera
1:00 PM - 1:40 PM

1:40 PM Top Tips for Best Paper, Simon Harris
Top Tips for Best Paper, Simon Harris
1:40 PM - 2:20 PM

2:20 PM Cryostat Design < 1K, Viktor Tsepelin
Cryostat Design < 1K, Viktor Tsepelin
2:20 PM - 3:00 PM

3:00 PM Refreshments for the CSE AGM (members only)
Refreshments for the CSE AGM (members only)
3:00 PM - 3:30 PM

3:30 PM

3:30 PM - 4:30 PM

6:00 PM Welcome Reception
Welcome Reception
6:00 PM - 8:00 PM
Tuesday, September 4, 2018

8:00 AM Registration and Refreshments
Registration and Refreshments
8:00 AM - 9:00 AM

9:00 AM Opening Ceremony
Opening Ceremony
9:00 AM - 10:00 AM

10:00 AM Conference Photo
Conference Photo
10:00 AM - 10:15 AM

10:30 AM Tea/Coffee and Exhibition
Tea/Coffee and Exhibition
10:30 AM - 11:00 AM
11:00 AM
11:00 AM - 12:20 PM
Contributions

11:00 AM E-01: 072 - Commissioning of the cryogenic system of the new test facility for large superconducting devices at CERN

11:20 AM E-01: 110 - SCL3 cryoplant process design for RAON

11:40 AM E-01: 111 - Simulation on LN 2 -VN 2 flooding phenomenon in inclined pipes using a modified AIAD model
11:00 AM - 12:20 PM
Contributions

11:00 AM E-03: 133 - Performance testing of the FRIB helium compression system at MSU

11:20 AM E-03: 148 - Study on the cavitation of liquid oxygen flowing through the globe valve

11:40 AM E-03: 281 - Characterization of a scroll-type compressor for driving a JT cryocooler working at liquid helium temperature

12:00 PM E-03: 347 - Characterizing Helium pulsating heat pipes
11:00 AM - 12:20 PM
Contributions

11:00 AM E-08: 53 - Cryogenic systems for a PrFeB-based cryogenic permanent magnet undulator at TPS

11:20 AM E-08: 54 - Concept for the cryo distribution system of the Wendelstein 7-X cryo vacuum pumps

11:40 AM E-08: 59 - Design, construction and commissioning of the proximity cryogenics systems serving two large-scale prototypes of the future DUNE neutrino detector.

12:00 PM E-08: 61 - Engineering conceptual design of the CFETR cryogenic system
11:00 AM - 12:20 PM
Contributions

11:00 AM M-01: 064 - Manufacture and Characterisation of Bulk MgB 2 Superconductor with High Trapped Field for Biomedical Applications

11:20 AM M-01: 224 - Atmospheric oxidation of NbTi superconductors

11:40 AM M-01: 262 - Enhanced Jc at both self and high field of MgB 2 superconductor through co-doping route

12:00 PM M-01: 331 - CIC cable technologies for high-current windings
11:00 AM - 12:00 PM
Contributions

11:00 AM M-10:005 - Solid methane in radiation: neutron cryo moderators and cometary cryo volcanism

11:20 AM M-10:16 - Study on irradiation effect of insulating materials for fusion superconducting magnet: change in electric insulation performance by irradiation

11:40 AM M-10: 346 - Continuum Damage Mechanics analysis of the process pipes at cryogenic conditions
12:00 PM
12:00 PM - 12:20 PM
Contributions

12:00 PM M-11: 051 - Experimental investigations on bubble rising process of methane and ethane at saturated nucleate pool boiling condition
12:30 PM Lunch & Exhibition
Lunch & Exhibition
12:30 PM - 1:30 PM

1:30 PM (Plenary 1 - Challenges of Cryocooling. Speaker: A.T.A.M. de Waele. Session Chair: Prof. Ercang Luo)
(Plenary 1 - Challenges of Cryocooling. Speaker: A.T.A.M. de Waele. Session Chair: Prof. Ercang Luo)
1:30 PM - 2:30 PM
2:30 PM
2:30 PM - 3:50 PM
Contributions

2:30 PM E-01: 149 - Helium market: applications, strategies and logistics issues

2:50 PM E-01: 152 - Study on an energy saving method by the utilization of compression heat in a cryogenic air separation unit

3:10 PM E-01: 153 - Visualization study on nitrogen condensation with non-condensable gas in wavy laminar flow region

3:30 PM E-01: 256 - Transient modelling of large scale integrated refrigeration and storage systems
2:30 PM - 3:45 PM
Contributions

2:30 PM E-07: 180 - Design of 1MJ SMES unit

2:45 PM E-07: 213 - Long term operation of the superconducting triplet quadrupoles with cryocoolers for BigRIPS in-flight separator at RIKEN

3:00 PM E-07: 323 - Superconducting detector magnets at the Future Circular Colliider

3:15 PM E-07: 139 - Cooling large HTS magnet coils using a gas free-convection cooling loop connected to coolers

3:30 PM E-07: 202 - Thermohydraulic behaviour of the cryogenic system during protected quenching of the superconducting magnet of a hybrid magnet
2:30 PM - 3:50 PM
Contributions

2:30 PM E-08: 81 - Hydraulic adjustment of the two-phase helium forced flow cooled superconducting magnets of the SIS100 heavy ion synchrotron for FAIR

2:50 PM E-08: 109 - Conceptual design of cryogenic system for comprehensive research facility for key fusion reactor core systems

3:10 PM E-08: 154 - Refrigerator and liquefaction system supplied by Linde Kryotechnik for IHEP’s PAPS SRF Facility

3:30 PM E-08: 155 - 4.5 K Refrigerator Cold Box System for the Facility for Rare Isotope Beams (FRIB) at Michigan State University (MSU)
2:30 PM - 3:50 PM
Contributions

2:30 PM E-17: 15 - Study on the heat transfer of helium cryostats following loss of insulating vacuum

2:50 PM E-17: 118 - Status of a European standard for the protection of helium cryostats against excessive pressure

3:10 PM E-17: 344 - Test stand for determination of the heat flux to the cold elements of cryogenic systems in case of the vacuum vessel failure

3:30 PM E-17: 368 - Review of failure rate input parameters to risk analysis of cryogenic complex systems
2:30 PM - 3:30 PM
Contributions

2:30 PM M-03: 078 - Cold test and analysis AC losses in compact 2G HTS power cables

3:10 PM M-03: 178 - Optimum rate of charging and discharging cycles of HTS-SMES magnets
4:00 PM Tea/Coffee & Exhibition
Tea/Coffee & Exhibition
4:00 PM - 4:20 PM
4:20 PM Poster Session 1
Poster Session 1
4:20 PM - 5:30 PM
Contributions

4:20 PM E-01: Large scale refrigeration, liquefaction, air separation and industrial cryogenics

4:20 PM E-02: Cryocoolers: Pulse tube, GM, Stirling, Magnetic and other coolers

4:20 PM E-01:389 - Development of Commissioning and operation of CSNS Cryogenic System
Poster Session 2
Poster Session 2
4:20 PM - 5:30 PM
Contributions

4:20 PM E-02: Cryocoolers: Pulse tube, GM, Stirling, Magnetic and other coolers

4:20 PM E-03: Expanders, cryo-pumps, compressors, regenerators and other component

4:20 PM E-04: Space cryogenic applications
6:00 PM Exhibition Reception
Exhibition Reception
6:00 PM - 8:00 PM
Wednesday, September 5, 2018

7:30 AM Registration and Refreshments
Registration and Refreshments
7:30 AM - 8:30 AM

8:30 AM Next Generation Materials for Future Magnet Development at CERN. Speaker: Glyn Kirby. Session Chair: Prof. H.J.M. ter Brake
Next Generation Materials for Future Magnet Development at CERN. Speaker: Glyn Kirby. Session Chair: Prof. H.J.M. ter Brake
8:30 AM - 9:30 AM

9:30 AM Stopping biological time – merging biology and cryonics in cryobiology. Speaker: Barry Fuller. Session Chair: Prof. H.J.M. ter Brake
Stopping biological time – merging biology and cryonics in cryobiology. Speaker: Barry Fuller. Session Chair: Prof. H.J.M. ter Brake
9:30 AM - 10:30 AM

10:30 AM Tea/Coffee & Exhibition
Tea/Coffee & Exhibition
10:30 AM - 11:00 AM
11:00 AM
11:00 AM - 12:30 PM
Contributions

11:00 AM E-02: 196 - Investigation of a coaxial Stirling-type pulse tube cryocooler with the cooling capacity of 600 W at 777 k

11:20 AM E-02: 55 - Investigation of U-type multi-bypass Pulse tube cooler

11:40 AM E-02: 018 - Numerical study on the performance sensitivity of a pulse tube cryocooler with active phase shifter

12:00 PM E-02: 037 - Low Cost Flexure Spring Testing
11:00 AM - 12:30 PM
Contributions

11:00 AM E-07: 33 - Technical challenges of developing High Field Superconducting Magnets beyond 25 Tesla

11:20 AM E-07: 35 - Cryogenic test results of the superconducting magnets for the NICA complex and the SIS100 synchrotron of FAIR

11:40 AM E-07: 56 - Test stand for the characterization of superconducting magnets cooled with cryocoolers

12:00 PM E-07: 62 - Experimental and numerical study of the different quench acceleration phenomena in the JT-60SA Toroidal Field Coils
11:00 AM - 12:30 PM
Contributions

11:00 AM E-08: 156 - Quench detection of SRF cavities using He2* molecular tracer-line tracking technique in superfluid helium

11:20 AM E-08: 159 - Superfluid Helium Cooling and Compact Heat Exchanger for HL-LHC D2 Recombination Dipoles

11:40 AM E-08: 162 - Heat source localisation by trilateration of helium II second sound detected with transition edge sensors thermometry

12:00 PM E-08: 186 - Progress of PAPS cryogenic system
11:00 AM - 12:30 PM
Contributions

11:00 AM E-13: 127 - Performance test and evaluation on emergency release system for liquefied hydrogen installed in the loading/unloading system

11:20 AM E-13: 265 - Developments in Hydrogen Liquefaction Plants

11:40 AM E-13: 339 - A mixed refrigerant cycle for cooling below 25 K

12:00 PM E-13: 363 - Subcooling of liquid hydrogen with a cryogenic refrigerator
11:00 AM - 12:30 PM
Contributions

11:00 AM M-06: 011 - Extraction of instrumentation wires through the high-voltage insulation in the ITER magnet feeder system

11:20 AM M-06: 068 - An excellent cryogenic grinding performance of scrap tire rubber swollen by ScCO2

11:40 AM M-06: 320 - Enhancing high vacuum performance of multi-layer insulation systems with activated charcoal fabric

12:00 PM M-06: 322 - Cryogenic properties of T/HDPE nanocomposites
11:00 AM - 12:30 PM
Contributions

11:00 AM S-01: 161 - Study of HTS superconducting coatings for beam impedance mitigation in the Future Circular Collider

11:40 AM S-01: 049 - Numerical modelling of mechanical stresses in bulk superconductor magnets with and without mechanical reinforcement
12:30 PM Lunch & Exhibition
Lunch & Exhibition
12:30 PM - 1:30 PM
1:30 PM
1:30 PM - 3:15 PM
Contributions

1:30 PM E-02: 216 - Theoretical and experimental investigations on a four-stage Stirling-type pulse tube cryocooler reaching 3.0 K

2:05 PM E-02: 200 - Review of recent advances in Stirling-type pulse tube cryocoolers

2:40 PM E-02: 221 - Theoretical and experimental investigations on a 12 kW Oxford-type dual-opposed moving-coil linear compressor
1:30 PM - 4:00 PM
Contributions

1:30 PM E-08: 199 - Commissioning of the SuperKEKB final focusing SC magnet cryogenic systems

1:55 PM E-08: 201 - Thermodynamic cycle design for a 700W@3K sub-cooled helium refrigerator test facility

2:20 PM E-08: 249 - Overview and status of the Long-Baseline Neutrino Facility cryogenics system

2:45 PM E-08: 250 - Experimental and numerical investigations of operational parameters of TRIUMF’s cyclotron cryogenic system

3:10 PM E-08: 287 - Cryogenic system for the SCLF cryomodule test facility

3:35 PM E-08: 317 - Final commissioning of the helium cryogenic system for the HIE-Isolde project including four RF cryo-modules
1:30 PM - 4:00 PM
Contributions

1:30 PM E-14: 73 - Experimental study of a meter-scale cryogenic neon pulsating heat pipe

1:55 PM E-14: 163 - Superconducting cavities quench localisation by He-II second sound detection with transition edge sensors

2:20 PM E-14: 183 - All polymer cryogen free cryostat for μ-MRI application at clinical field

2:45 PM E-14: 237 - Cold, clean and green: improving the efficiency and environmental impact of a cryogenic expander

3:10 PM E-14: 313 - Cryogenic Hydrogen Targets for proton generation with intense lasers.

3:35 PM E-14: 338 - DC current injection into HTS coils using a superconducting dynamo.
1:30 PM - 2:00 PM
Contributions

1:30 PM M-06: 335 - Aerogel-based insulation materials for cryogenic applications
1:30 PM - 4:00 PM
Contributions

1:30 PM M-11: 286 - Development of the stranded cable-type heat conductor made of ultra-high purity Aluminium

2:00 PM M-11: 314 - Velocity measurements in high Reynolds cryogenic helium facilities at SBT

2:30 PM M-11: 090 - A different approach at solid and super solid Helium 4

3:00 PM M-11: 134 - Design and simulation of the cold compressor impeller in large superfluid helium system

3:30 PM M-11: 185 - Pressure loss behaviour of LN2 flow in helically corrugated pipes with insertion of HTS power transmission cables
1:30 PM - 4:00 PM
Contributions

1:30 PM S-01: 006 - High transport Jc in magnetic fields up to 27 T in Ba0.6K0.4Fe2As2 superconductor tapes

2:20 PM S-01: 329 - Influence of the HTS Roebel cable architecture on its mechanical and electrical properties

3:10 PM S-01: 387 - Design aspects and operational characteristics of the NHMFL 32T superconducting magnet
2:00 PM
2:00 PM - 4:00 PM
Contributions

2:00 PM M-07: 238 - Metallurgical changes of cryogenically created coated carbide and its performance while wet machining austenitic stainless steel – 310

2:40 PM M-07: 131 - Design of device for thermal emissivity measurement at low temperature based on cryocooler

3:20 PM M-07: 022 - Fatigue cyclic testing of the ITER CS inlets
3:15 PM
3:15 PM - 3:50 PM
Contributions

3:15 PM E-01: 129 Turbo-Brayton cryogenic systems: latest commissioning and new applications
4:00 PM Tea/Coffee & Exhibition
Tea/Coffee & Exhibition
4:00 PM - 4:20 PM
4:20 PM Poster Session 3
Poster Session 3
4:20 PM - 5:30 PM
Contributions

4:20 PM E-05: Cryostat technology and thermal insulation

4:20 PM E-06: Thermo-physical properties of solids and fluids in cryo-systems

4:20 PM E-07: Magnet technology, design and evaluation
Poster Session 4
Poster Session 4
4:20 PM - 5:30 PM
Contributions

4:20 PM E-07: Magnet technology, design and evaluation

4:20 PM E-08: Large scale cryogenics: fusion reactors, accelerators, superconducting cavities and detectors

4:20 PM E-09: Low temperature refrigeration for quantum computers, detectors and LT experiments

4:20 PM E-10: Superconducting current leads and links

4:20 PM M-01: rocessing and properties NbTi/Nb3Sn/A15/RE123/BSCCO and MgB2
6:00 PM ICEC Board meeting (members only)
ICEC Board meeting (members only)
6:00 PM - 7:00 PM
Thursday, September 6, 2018

7:30 AM Registration & Refreshments
Registration & Refreshments
7:30 AM - 8:30 AM

8:30 AM Lessons Learned from ITER Magnets: Materials Development & Industrialisation. Speaker: Neil Mitchell. Session Chair: Prof. Herman ten Kate
Lessons Learned from ITER Magnets: Materials Development & Industrialisation. Speaker: Neil Mitchell. Session Chair: Prof. Herman ten Kate
8:30 AM - 9:30 AM
9:30 AM
9:30 AM - 10:30 AM
Contributions

9:30 AM E-02: 305 - Outgassing characteristics analysis of mechanical cryocooler materials

10:00 AM E-02: 318 - Minimising flow losses within the pulse tube of a Stirling pulse tube cryocooler
9:30 AM - 10:30 AM
Contributions

9:30 AM E-04: 203 - In-orbit performance of the SLSTR cryo-cooler system on Sentinel 3A.

9:50 AM E-04: 108 - Development of a new MLI for orbital cryogenic propulsion systems: thermal performance under one atmosphere to vacuum

10:10 AM E-04: 364 - ADR Design and Operation for the X-ray Astrophysics Recovery Mission XARM
9:30 AM - 10:30 AM
Contributions

9:30 AM E-05: 167 - Design of the Helium gas transfer line for the Warm Regeneration System of the ITER fusion reactor

9:45 AM E-05: 169 - Experimental measurements on MLI performance from 20-60 K to 4.2 K

10:00 AM E-05: 272 - Thermal performance of the new superfluid helium vertical test cryostats for magnet tests at CERN
9:30 AM - 10:30 AM
Contributions

9:30 AM E-08: 325 - Options for a reliable cryogenic supply for the FAIR facility

9:45 AM E-08: 349 - Conceptual design of the DTT magnets cooling loops

10:00 AM E-08: 354 - Cryogenic supply for the facility for antiproton and ion research

10:15 AM E-08: 376 - Preliminary conceptual design of FCC-hh refrigerators: Linde evaluation
9:30 AM - 10:30 AM
Contributions

9:30 AM E-15: 36 - MRI and its global impact in healthcare

9:50 AM E-15: 191 - A tissue snap-freezing device without sacrificial cryogens

10:10 AM E-15: 291 - Snap-freezing of biological specimens enclosed in cryo-vials with different thermal properties: a quantitative study
9:30 AM - 10:30 AM
Contributions

9:30 AM M-04: 382 - Thirty years of bulk superconductivity: history and prospects

9:50 AM M-04: 171 - Effect of bending and twisting in electro-mechanical properties of HTS Tapes used for HTS power cable
10:10 AM
10:10 AM - 10:30 AM
Contributions

10:10 AM E-11: 021 - Rotor cooling concept for the ASuMED superconductive motor
10:30 AM Tea/Coffee & Exhibition
Tea/Coffee & Exhibition
10:30 AM - 10:50 AM
10:50 AM Poster Session 5
Poster Session 5
10:50 AM - 12:30 PM
Contributions

10:50 AM E-15: Biological, medical and food applications

10:50 AM E-13: LNG and hydrogen systems

10:50 AM E-16: Instrumentation, telemetry and process control

10:50 AM E-11: Cryogenics for power applications and transportation

10:50 AM E-12: Various applications of superconductors

10:50 AM E-14: New devices and novel concepts
Poster Session 6
Poster Session 6
10:50 AM - 12:30 PM
Contributions

10:50 AM E-16: Instrumentation, telemetry and process control

10:50 AM E-17: Safety, reliability and standards

10:50 AM M-01: Processing and properties NbTi/Nb3Sn/A15/RE123/BSCCO and MgB2

10:50 AM M-02: Pnictides and other superconducting materials

10:50 AM M-03: Superconductor stability, AC losses and electromagnetic properties

10:50 AM M-04: HTS Bulk, thin films and cables

10:50 AM M-06: Metallic, composite materials, insulation and impregnation materials processing and properties

10:50 AM M-07: Cryogenic materials testing and methods

10:50 AM M-08: New cryogenic materials properties and applications

10:50 AM M-09: Cryogenic low and high power electronics, superconducting detectors

10:50 AM M-10: Radiation and other degradation effects

10:50 AM M-11: Heat transfer, thermodynamic and fluid properties of cryogenic materials

10:50 AM M-03: 095 - Insulative high thermal conduction plastics for increase of stability in conduction-cooled HTS coils
12:30 PM Lunch & Exhibition
Lunch & Exhibition
12:30 PM - 1:30 PM

1:30 PM The EcoSwing Project. Speaker: Tiemo Winkler. Session Chair: Prof. Chris Grovenor
The EcoSwing Project. Speaker: Tiemo Winkler. Session Chair: Prof. Chris Grovenor
1:30 PM - 2:30 PM
2:30 PM
2:30 PM - 3:30 PM
Contributions

2:30 PM E-06: 030 - Study on heat transfer between the High Luminosity LHC beam screens and the He II-cooled beam tube

3:00 PM E-06: 31 - Study on transient heat transport at metal to dielectric interfaces in the temperature range between 3.5 K and 30 K
2:30 PM - 3:30 PM
Contributions

2:30 PM E-09: 341 - Ultra-low vibration Helium reliquefiers for Magnetoencephalography

3:00 PM E-09: 350 - Continuous sub-kelvin cooling from an adiabatic demagnetization refrigerator
2:30 PM - 3:30 PM
Contributions

2:30 PM E-16: 046 - Implementation of preventive diagnostics measures for the CERN cryogenic system

2:50 PM E-16: 082 - Characterization of the Venturi flowmeters for the control of ITER magnets

3:10 PM E-16: 172 - Measurements of pressure oscillations and mechanical vibrations
2:30 PM - 3:00 PM
Contributions

2:30 PM M-04: 327 - Enhanced-textured-powder Bi-2212/Ag wire development
3:00 PM
3:00 PM - 3:30 PM
Contributions

3:00 PM M-09: 063 - A Compact 4 K Cooling System for Superconducting Nanowire Single Photon Detectors
3:30 PM Tea Coffee & Exhibition
Tea Coffee & Exhibition
3:30 PM - 4:00 PM
4:00 PM
4:00 PM - 5:00 PM
Contributions

4:00 PM E-04: 098 - Cooling performance of Joule Thomson coolers in 300K-50mK cryochain demonstration for ATHENA X-IFU

4:30 PM E-04: 105 - Emissivity of black plated open honeycomb and black coatings at cryogenic temperatures
4:00 PM - 5:00 PM
Contributions

4:00 PM E-05: 301 - Design of an ultra-thin, radiation length optimized, metallic cryostat for a 2T/4m free bore detector solenoid

4:30 PM E-05: 275 - Development of thin, highly radiation transparent cryostats for the detector magnets of the Future Circular Collider
4:00 PM - 5:00 PM
Contributions

4:00 PM E-09: 32 - Heat transfer at dielectric – metallic interfaces in the ultra-low temperature range

4:20 PM E-09: 34 - Development trends in Superconducting and Cryogenics technologies for Quantum Applications

4:40 PM E-09: 187 - Stable temperature regulation for TES test below 200mK employing improved Cohen-Coon method
4:00 PM - 4:30 PM
Contributions

4:00 PM E-10: 017 - Development of 10 kA current leads cooled by a cryogenic mixedrefrigerant cycle
4:00 PM - 5:00 PM
Contributions

4:00 PM M-04: 190 - Comparison of the superconducting properties of YBa2Cu3O7 and YBa2Cu3O7-Ag

4:30 PM M-04: 223 - Design considerations for electric motors using stacks of high temperature superconducting tape as permanent magnets
5:00 PM Closing Ceremony
Closing Ceremony
5:00 PM - 6:00 PM

7:00 PM Conference Dinner (Tickets Only)
Conference Dinner (Tickets Only)
7:00 PM - 11:00 PM